TECHSPEC® Machine Vision Filters
Edmund Optics® new line of TECHSPEC® Machine Vision Filters are designed with the industry’s best performance to cost ratio in mind. With extremely sharp edge transition and flat peak transmission, users are guaranteed the optimal signal-to-noise ratio in their imaging system without losing light intensity that is critical for performance.
On average, the blocking range reaches far into the UV at 200nm and stretches out to 1200nm, which covers most of the noise and UV/IR signatures seen in conventional lamps and bulbs.
The graphs below demonstrate the performance typical to our Machine Vision Filters and other Hard Coated filters. The sharp cut-on and cut-off wavelengths are noticeably apparent, as well as transmission values that are >10% improved over traditional imaging filters on the market.
|Filter Thread||Outer Diameter (mm)||Front Thread (to allow for stacking)||Filter Diameter (mm)||Thickness (mm)||Thread Length (mm)||Clear Aperture CA (mm)|
|M22.5 x 0.50||24.5||M22.5 x 0.50||20.1 ±0.1||4.5||2.0||18.5|
|M25.5 x 0.50||27.5||M25.5 x 0.50||23.0 ±0.1||4.5||2.0||21.5|
|M30.5 x 0.50||32.5||M30.5 x 0.50||28.0 ±0.1||5.0||2.0||26.5|
|M34.0 x 0.50||36.0||M34.0 x 0.50||31.6 ±0.1||5.0||1.5||30.0|
|M35.5 x 0.50||37.0||M35.5 x 0.50||33.1 ±0.1||5.0||2.0||31.5|
|M40.5 x 0.50||42.0||M40.5 x 0.50||38.0 ±0.1||5.0||2.0||36.5|
|M43.0 x 0.75||45.0||M43.0 x 0.75||40.2 ±0.1||5.0||2.0||39.2|
|M46.0 x 0.75||48.0||M46.0 x 0.75||43.2 ±0.1||4.8||2.2||41.5|
|M55.0 x 0.75||57.0||M55.0 x 0.75||52.2 ±0.1||4.8||2.2||50.5|
|M62.0 x 0.75||65.0||M62.0 x 0.75||59.2 ±0.1||5.5||2.5||57.5|