0.1mm/50DIV，镜台测微尺

• 用于安装在显微镜载物台上的刻度居中分划板
• 用于常规校准的设计
• 1 x 3" 载玻片尺寸

台式测微尺是居中绘制的并安装在1" x 3"载玻片上的分划板刻度。这些台式测微尺设计用于显微镜目镜分划板和物镜倍数的常规校准，尤其是在不同显微镜之间更换物镜或目镜分划板时使用。这些测微计的厚度公差为±0.1mm。台式测微尺型号#36-121在透明玻璃载玻片上厚度为1mm，并带有10mm玻璃圆盘；其他型号厚度为1.5mm，带有黑色阳极氧化铝载玻片和12.5mm的透明孔径，用于16mm直径的玻璃圆盘。型号#36-121没有编号刻度。 

Stage Micrometers provide precise calibration standards with fine division markings for accurate microscope system alignment and measurement verification. With line widths as fine as 0.001mm and thickness tolerances of ±0.1mm, they support high-accuracy system setups. The durable glass and anodized aluminum constructions ensure reliability for educational, research, and industrial environments.