Edmund Optics^®

When it comes to your lens, the f/# is one of the most important settings because it controls multiple parameters. Find out what the f/# controls at Edmund Optics.

Want to learn how to extend a lens beyond its limits in an application? Learn more about spacers, shims, and focal length extenders at Edmund Optics.

Advances in microscopy, imaging, and extreme ultraviolet optics

Light pipes are optical components that are typically used to increase the uniformity of a light source or to direct light.

Do you want to learn about optical filters? Find terminology, fabrication techniques, a selection guide, and application examples at Edmund Optics.

Beamsplitters do exactly what their name implies: split incident light beams.

New optical filters are being developed due to the advancements in applications and technologies. Learn more about the future of filters at Edmund Optics.

Metrology is critical for ensuring that optical components consistently meet their desired specifications, especially in laser applications.

Laser beam expanders are critical for reducing power density, minimizing beam diameter at a distance, and minimizing focused laser spot size.

The unique absorption properties of 2µm lasers allow them to create small and precise cuts for medical and materials processing applications

Optical Filters are used to selectively transmit or block certain wavelengths or wavelength ranges within optical systems.

With over 65 optical glass types readily available at manufacturing sites, EO enables quick prototyping. View the full list of glass types at Edmund Optics.

Beam Conditioning Optics for UV, IR, and Broadband Lasers

Are you new to imaging or looking for a refresh on camera types? Learn about the advantages to camera types, digital interfaces, and more at Edmund Optics.

了解确保激光应用成功必须考虑的关键参数。将为这些参数建立通用术语。

Trying to understand optical aberrations? Check out how to identify aberrations and view examples at Edmund Optics.

Want to know about fluorescence microscopy? Read this article by a Biomedical Product Line Engineer at Edmund Optics to learn more.

Continuing from where Part I: X-Y Setup ends, learn how to add a Z-axis to an existing X-Y configuration to achieve three degrees of freedom.

Looking for application examples? Find examples for Detector Systems, Selecting the Right Lens, and Building a Projection System at Edmund Optics.

Superpolished optics with sub-angstrom surface roughness are ideal for precise laser optics applications

Learn about the metrology that Edmund Optics® uses to guarantee the quality of all optical components and assemblies.

Choosing the right optical glass is important. Find out factors and properties on how to select the right optical glass at Edmund Optics.

Do you want to know more about the importance of optical specifications? Learn the different types of specifications and their impact on your system at Edmund Optics.

There are several metrics used to describe the quality of a laser beam including the M2 factor, the beam parameter product, and power in the bucket

Are you designing an optical system? Be sure to review these 5 considerations relating to mechanical design, assembly, and alignment at Edmund Optics.

In order to understand vignetting, it is important to understand sensor sizes, formats, and roll-off and relative illumination. Find out more at Edmund Optics.

Quickly Respond to Collapsing Product Lifecycles

Want to know more about fluorophores and optical filters for fluorescence microscopy? Find out more information and in stock optical filters at Edmund Optics.

Looking for the best way to clean optics? Learn more about the different cleaning products and methods, along with tips to handle optics at Edmund Optics.